Xylem MultiLab 4010-2 Manuel d'utilisateur Page 55
- Page / 112
- Table des matières
- MARQUE LIVRES
Noté. / 5. Basé sur avis des utilisateurs
MultiLab 4010-2 Conductivity
ba76142e01 05/2013 55
8 Conductivity
8.1 Measuring
8.1.1 Measuring the conductivity
Selecting the
displayed
measured parameter
You can switch between the following displays with <M>:
Conductivity [μS/cm] / [mS/cm]
Resistivity [Ω·cm] / [kΩ·cm] / [MΩ·cm]
Salinity SaL [ ] (
≙ psu)
Total dissolved solids TDS [mg/l] / [g/l]
The factor to calculate the total dissolved solids is set to 1.00 in the factory. You
can adjust this factor to meet your requirements in the range 0.40 ... 1.00. The
factor is set in the menu for the parameter TDS.
Stability control
(AutoRead)
& HOLD function
The stability control function (AutoRead) continually checks the stability of the
measurement signal. The stability has a considerable impact on the reproduc-
ibility of measured values.
The measured parameter flashes on the display
as soon as the measured value is outside the stability range
when the automatic Stability control is switched off.
The sensor connection and the USB-B (device) interface are gal-
vanically isolated. This facilitates interference-free measurements
also in the following cases:
Measurement in grounded test samples
Measurement with several sensors connected to one
MultiLab 4010-2 in one test sample
1. Connect the conductivity sensor to the meter.
The conductivity measuring window is displayed.
The measuring cell and cell constant for the connected IDS conductivity
sensor are automatically taken over.
2. If necessary, press <M> to select the measured parameter ϰ.
3. Immerse the conductivity sensor in the test sample.
03.04.2013 08:00Info
- MultiLab 4010-2 1
- © 2013 Xylem Inc 2
- MultiLab 4010-2 - Contents 3
- 4 ba76142e01 05/2013 4
- 6 ba76142e01 05/2013 6
- 1 Overview 7
- 1.2 Sensors 8
- 2.1 Safety information 10
- 2.2 Safe operation 10
- ECHNICAL DATA, page 94) 11
- 3 Commissioning 12
- ENERAL DATA, page 94) 13
- ENERAL DATA 13
- 4 Operation 14
- AutoCal TEC 15
- 16 ba76142e01 05/2013 16
- 03.04.2013 08:00 17
- 4.2 Switching on the meter 19
- 4.3 Switching off the meter 19
- 4.4 Login with user name 19
- 20 ba76142e01 05/2013 20
- User name Admin 20
- Password #### 20
- Change password 20
- 4.5 Navigation 21
- Date format: dd.mm.yy 25
- Date: 03.04.2013 25
- Time: 14:53:40 25
- Clock function 25
- 26 ba76142e01 05/2013 26
- 5 pH value 27
- Δ : Better than 0.01 pH 28
- Δ : Better than 0.5 °C 28
- 5.2 pH calibration 29
- 30 ba76142e01 05/2013 30
- 32 ba76142e01 05/2013 32
- 34 ba76142e01 05/2013 34
- _> key 36
- _>, output all cali 37
- HAT TO DO IF..., page 89) 38
- FUNCTION 38
- 40 ba76142e01 05/2013 40
- 42 ba76142e01 05/2013 42
- 6 ORP voltage 43
- Δ : Better than 0.3 mV 44
- 6.2 ORP calibration 45
- 7 Dissolved oxygen (D.O.) 46
- ATURATION LOCAL, page 67) 47
- 7.2 Calibration 48
- 50 ba76142e01 05/2013 50
- 52 ba76142e01 05/2013 52
- _>, output all 53
- HAT TO DO IF... 54
- 8 Conductivity 55
- Δ ϰ: better than 56
- 8.2 Temperature compensation 57
- 8.3 Calibration 58
- 9Settings 61
- 62 ba76142e01 05/2013 62
- * 4.000 64
- 9.2 ORP measurement settings 65
- 9.3 D.O. measurement settings 66
- ATURATION LOCAL, page 67 67
- 9.4 Cond measurement settings 68
- EMPERATURE 69
- COMPENSATION, page 57) 69
- ESETTING THE MEASUREMENT SET 69
- TINGS, page 73) 69
- 70 ba76142e01 05/2013 70
- _> key in the mea 71
- 72 ba76142e01 05/2013 72
- 9.6 Reset 73
- 74 ba76142e01 05/2013 74
- _> key in the 75
- 10.3 Measurement data storage 79
- 11 Transmitting data 82
- (USB-A interface (USB Host)) 83
- 84 ba76142e01 05/2013 84
- (USB memory device) 85
- 11.7 MultiLab Importer 85
- 11.8 BOD Analyst Pro 85
- 12.1 Maintenance 86
- 12.2 Cleaning 87
- 12.3 Packing 87
- 12.4 Disposal 87
- 88 ba76142e01 05/2013 88
- 13 What to do if 89
- 13.2 Dissolved oxygen 90
- 13.3 Conductivity 91
- 13.4 General information 92
- 14 Technical data 94
- CERTIFICATE OF ANALYSIS 96
- 15 Firmware update 98
- 16 Glossary 100
- Dissolved oxygen 101
- General information 101
- 102 ba76142e01 05/2013 102
- 17 Index 103
- 104 ba76142e01 05/2013 104
- MultiLab 4010-2 Index 105
- 18 Appendix 106
- MultiLab 4010-2 Appendix 107
- 18.2 DO% Calibration values 108
- 19 Contact Information 109
- Xylem 112
Produits connexes et manuels pour Outils Xylem MultiLab 4010-2
(112 pages)
Outils Xylem TFX Serie Manuel d'utilisateur
(38 pages)
(38 pages)
Outils Xylem TFX 422 Manuel d'utilisateur
(36 pages)
(36 pages)
Outils Xylem PHT 810 Manuel d'utilisateur
(42 pages)
(42 pages)
Outils Xylem EBI 20-TF Manuel d'utilisateur
(40 pages)
(40 pages)
Outils Xylem FOM 320 Manuel d'utilisateur
(28 pages)
(28 pages)
Outils Xylem DR-22 Manuel d'utilisateur
(2 pages)
(2 pages)
Outils Xylem TFE 510 Manuel d'utilisateur
(18 pages)
(18 pages)
Outils Xylem EBI 310 Manuel d'utilisateur
(52 pages)
(52 pages)
Outils Xylem TLC 730 Manuel d'utilisateur
(48 pages)
(48 pages)
Casio Модуль 5109 manuali
Manuali dei proprietari e guide per l'utente per Orologio Casio Модуль 5109.
We fornisce 1 manuali pdf Casio Модуль 5109 per scaricare gratuitamente in base al tipo di documento: Manuale Utente
Commentaires sur ces manuels