Xylem MultiLab 4010-2 Manuel d'utilisateur télécharger pdf (Page 26)

Operation MultiLab 4010-2

26 ba76142e01 05/2013

4. Change and confirm the setting with <><> and <ENTER>.

The minutes are highlighted.

5. Change and confirm the setting with <><> and <ENTER>.

The seconds are highlighted.

6. Change and confirm the setting with <><> and <ENTER>.

The time is set.

7. If necessary, set the Date and Date format. The setting is made simi-

larly to that of the time.

8. To make further settings, switch to the next higher menu level with

<ESC>.

Switch to the measured value display with <M>.

The instrument is in the measuring mode.

1 2 ... 21 22 23 24 25 26 27 28 29 30 31 ... 111 112

MultiLab 4010-2 1
MultiLab 4010-2 - Contents 3
4 ba76142e01 05/2013 4
6 ba76142e01 05/2013 6
1 Overview 7
1.2 Sensors 8
2.1 Safety information 10
2.2 Safe operation 10
ECHNICAL DATA, page 94) 11
3 Commissioning 12
ENERAL DATA, page 94) 13
ENERAL DATA 13
4 Operation 14
AutoCal TEC 15
16 ba76142e01 05/2013 16
03.04.2013 08:00 17
4.2 Switching on the meter 19
4.3 Switching off the meter 19
4.4 Login with user name 19
20 ba76142e01 05/2013 20
User name Admin 20
Password #### 20
Change password 20
4.5 Navigation 21
Date format: dd.mm.yy 25
Date: 03.04.2013 25
Time: 14:53:40 25
Clock function 25
26 ba76142e01 05/2013 26
5 pH value 27
Δ : Better than 0.01 pH 28
Δ : Better than 0.5 °C 28
5.2 pH calibration 29
30 ba76142e01 05/2013 30
32 ba76142e01 05/2013 32
34 ba76142e01 05/2013 34
_> key 36
_>, output all cali 37
HAT TO DO IF..., page 89) 38
FUNCTION 38
40 ba76142e01 05/2013 40
42 ba76142e01 05/2013 42
6 ORP voltage 43
Δ : Better than 0.3 mV 44
6.2 ORP calibration 45
7 Dissolved oxygen (D.O.) 46
ATURATION LOCAL, page 67) 47
7.2 Calibration 48
50 ba76142e01 05/2013 50
52 ba76142e01 05/2013 52
_>, output all 53
HAT TO DO IF... 54
8 Conductivity 55
Δ ϰ: better than 56
8.2 Temperature compensation 57
8.3 Calibration 58
9Settings 61
62 ba76142e01 05/2013 62
* 4.000 64
9.2 ORP measurement settings 65
9.3 D.O. measurement settings 66
ATURATION LOCAL, page 67 67
9.4 Cond measurement settings 68
EMPERATURE 69
COMPENSATION, page 57) 69
ESETTING THE MEASUREMENT SET 69
TINGS, page 73) 69
70 ba76142e01 05/2013 70
_> key in the mea 71
72 ba76142e01 05/2013 72
9.6 Reset 73
74 ba76142e01 05/2013 74
_> key in the 75
10.3 Measurement data storage 79
11 Transmitting data 82
(USB-A interface (USB Host)) 83
84 ba76142e01 05/2013 84
(USB memory device) 85
11.7 MultiLab Importer 85
11.8 BOD Analyst Pro 85
12.1 Maintenance 86
12.2 Cleaning 87
12.3 Packing 87
12.4 Disposal 87
88 ba76142e01 05/2013 88
13 What to do if 89
13.2 Dissolved oxygen 90
13.3 Conductivity 91
13.4 General information 92
14 Technical data 94
CERTIFICATE OF ANALYSIS 96
15 Firmware update 98
16 Glossary 100
Dissolved oxygen 101
General information 101
102 ba76142e01 05/2013 102
17 Index 103
104 ba76142e01 05/2013 104
MultiLab 4010-2 Index 105
18 Appendix 106
MultiLab 4010-2 Appendix 107
18.2 DO% Calibration values 108
19 Contact Information 109
Xylem 112

Commentaires sur ces manuels

Pas de commentaire

Xylem MultiLab 4010-2 Manuel d'utilisateur Page 26

Commentaires sur ces manuels

Produits connexes et manuels pour Outils Xylem MultiLab 4010-2