Xylem F460 INLINE FLOW METERS Manuel d'utilisateur télécharger pdf

Specifications

Meter Body: Polysulfone, natural

Float Stops: Polysulfone, natural

Floats: Teflon

Adapters: PVDF or PVC*

O-Rings: Viton

Half-Union: Anodized aluminum, optional PVC

Scale: Permanent dual scale silkscreen

Maximum Pressure: 150 PSIG / 10.34 BAR at ambient temperature

Maximum Temperature:

See reverse side for Temperature Vs. Pressure graph

Dimensions (refer to drawing on right):

F-460 (1/2” and 3/4” female NPT)

Dim A = 1.75” (4.45 cm)

Dim B = 10” (25.4 cm)

F-461 (1” female NPT)

Dim A = 2.75” (6.99 cm)

Dim B = 15” (38.1 cm)

Your Blue-White Ultra Pure In-Line Flowmeter

Your Blue-White flowmeter was designed to be easy to install.

Please read the following instructions before installing your flowmeter.

This flowmeter is an instrument, and special care should be taken when installing.

Installation

Please use the following steps to guide you through the installation.

STEP 1. Unpack the flowmeter.

Check for damage while unpacking the flowmeter.

Make sure pressure, temperature, fluid and other requirements are compatible with the

meter.

STEP 2. Choose a suitable location for the flowmeter.

Never allow the flowmeter to support the weight of related pipe or tubing.

Flowmeter must be installed in plumbing which is free of vibration.

Flowmeter must be installed in an exact vertical plane to ensure accuracy.

The meter body is constructed of polysulfone. Polysulfone has a high chemical resis-

tance**, but a low UV tolerance. Keep meter away from direct sunlight.

Be certain the meter is properly aligned with existing plumbing. Misalignment may result

in damage to the flowmeter.

STEP 3. Connecting the flowmeter to the plumbing.

Use an appropriate amount of Teflon tape on external pipe threads before

making connections.

See installation guideline on the back of this instruction sheet.

(or similar)

80000-324 REV.3 2/2004

5300 Business Drive

Huntington Beach, CA 92649 USA

Dim B

Dim A

Adapter (2)

Half-Union (2)

Meter Body (1)

Scale (1)

Float (1)

Float Stop (2)

(inside)

* PVC has a temperature limit of 130 F / 54.4 C°°

** Flowmeters are tested and calibrated for water or air only.

Although meters may be suitable for other chemicals, Blue-White cannot guarantee their suitability.

Visit our website to see other available flow ranges and pipe sizes. www.Blue-White.com

Installation Instructions

F-460 and F-461 (ultra pure)

Blue-White

Industries, Ltd.

1 2

Résumé du contenu

Page 1 - Installation Instructions

SpecificationsMeter Body: Polysulfone, naturalFloat Stops: Polysulfone, naturalFloats: TeflonAdapters: PVDF or PVC*O-Rings: VitonHalf-Union: Anodized

Page 2 - Blue-White

Pressure and temperature limits are inversely proportional. At the maximum suggested pressure the temperature should approach 80°F / 26.7°C; at the ma

Commentaires sur ces manuels

Pas de commentaire

Xylem F460 INLINE FLOW METERS Manuel d'utilisateur

Naviguer en ligne ou télécharger Manuel d'utilisateur pour Outils Xylem F460 INLINE FLOW METERS. Xylem F460 INLINE FLOW METERS User Manual Manuel d'utilisatio

Résumé du contenu

Commentaires sur ces manuels

Produits connexes et manuels pour Outils Xylem F460 INLINE FLOW METERS